Decoder installation on V100 in TT(1:120)

Locomotive:        Tillig V100 (500466)
Decoder:            Flieschmann w/o sound NEM651 (6 pins)- FLM-685502 , 35 mm cable
Digital format:   DCC 
interface:          No
Milling:              No
Diffculty:            Easy

Here is it

Remove the cabin

Carefully desolder the DC-jumper. Or cut the pins and desolder one by one.

By decoder cable cut in way to keep 5-6 mm cable on decoder side. Solder ends. Solder cables to the board - 1-orange, 6-yellow. Put insolation on bottom side of the decoder. put the decoder on place of DC-jumper.

Assemble and test.